Subject: [Boost-commit] svn:boost r49507 - trunk
From: mike.jackson_at_[hidden]
Date: 2008-11-01 08:53:53
Author: imikejackson
Date: 2008-11-01 08:53:52 EDT (Sat, 01 Nov 2008)
New Revision: 49507
URL: http://svn.boost.org/trac/boost/changeset/49507
Log:
Starting merge of CMake build system files into trunk with the encouragement of Doug Gregor and others.
Added:
trunk/CMakeLists.txt (contents, props changed)
Added: trunk/CMakeLists.txt
==============================================================================
--- (empty file)
+++ trunk/CMakeLists.txt 2008-11-01 08:53:52 EDT (Sat, 01 Nov 2008)
@@ -0,0 +1,246 @@
+##########################################################################
+# CMake Build Rules for Boost #
+##########################################################################
+# Copyright (C) 2007, 2008 Douglas Gregor <doug.gregor_at_[hidden]> #
+# Copyright (C) 2007 Troy Straszheim #
+# #
+# Distributed under the Boost Software License, Version 1.0. #
+# See accompanying file LICENSE_1_0.txt or copy at #
+# http://www.boost.org/LICENSE_1_0.txt #
+##########################################################################
+# Basic Usage: #
+# #
+# On Unix variants: #
+# ccmake BOOST_DIRECTORY #
+# #
+# (c)onfigure options to your liking, then (g)enerate #
+# makefiles. Use "make" to build, "make test" to test, "make #
+# install" to install, and "make package" to build binary #
+# packages. #
+# #
+# On Windows: #
+# run the CMake GNU, load the Boost directory, and generate #
+# project files or makefiles for your environment. #
+# #
+# For more information about CMake, see http://www.cmake.org #
+##########################################################################
+cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR)
+project(Boost)
+
+
+##########################################################################
+# Post a warning to those attempting to use the CMake Build system. When #
+# the build system stabilizes this can be removed. #
+##########################################################################
+message(STATUS "##########################################################################")
+message(STATUS " THE CMAKE BUILD SYSTEM IS CURRENTLY UNDER DEVELOPMENT. PLEASE USE THE ")
+message(STATUS " BJAM BASED SYSTEM INSTEAD. IF YOU STILL WANT TO TRY IT OUT PLEASE COMMENT")
+message(STATUS " OUT THE LINE 'message(FATAL_ERROR \"\")' THAT APPEARS IN THE FILE ")
+message(STATUS " ${Boost_SOURCE_DIR}/CMakeLists.txt FILE.")
+message(STATUS "##########################################################################")
+message(FATAL_ERROR "")
+
+##########################################################################
+# Version information #
+##########################################################################
+set(BOOST_VERSION_MAJOR 1)
+set(BOOST_VERSION_MINOR 36)
+set(BOOST_VERSION_SUBMINOR 0)
+set(BOOST_VERSION "${BOOST_VERSION_MAJOR}.${BOOST_VERSION_MINOR}.${BOOST_VERSION_SUBMINOR}")
+##########################################################################
+
+# Put the libaries and binaries that get built into directories at the
+# top of the build tree rather than in hard-to-find leaf
+# directories. This simplifies manual testing and the use of the build
+# tree rather than installed Boost libraries.
+SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib)
+SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin)
+
+# ---------- Setup output Directories -------------------------
+SET (LIBRARY_OUTPUT_PATH
+ ${PROJECT_BINARY_DIR}/lib
+ CACHE PATH
+ "Directory for all Libraries"
+ )
+
+# --------- Setup the Executable output Directory -------------
+SET (EXECUTABLE_OUTPUT_PATH
+ ${PROJECT_BINARY_DIR}/bin
+ CACHE PATH
+ "Directory for all Executables."
+ )
+
+
+
+##########################################################################
+# Boost CMake modules #
+##########################################################################
+list(APPEND CMAKE_MODULE_PATH ${Boost_SOURCE_DIR}/tools/build/CMake)
+include(BoostUtils)
+include(BoostConfig)
+include(BoostBuildSlave)
+include(BoostCore)
+include(BoostDocs)
+include(BoostTesting)
+##########################################################################
+
+##########################################################################
+# Build Features and Variants #
+##########################################################################
+
+# Determine default settings for the variable BUILD_feature options
+if (MSVC)
+ set(BUILD_SINGLE_THREADED_DEFAULT OFF)
+else ()
+ set(BUILD_SINGLE_THREADED_DEFAULT OFF)
+endif ()
+
+# User-level options deciding which variants we will build.
+option(BUILD_STATIC "Whether to build static libraries" ON)
+option(BUILD_SHARED "Whether to build shared libraries" ON)
+option(BUILD_DEBUG "Whether to build debugging libraries" ON)
+option(BUILD_RELEASE "Whether to build release libraries" ON)
+option(BUILD_SINGLE_THREADED "Whether to build single-threaded libraries"
+ ${BUILD_SINGLE_THREADED_DEFAULT})
+option(BUILD_MULTI_THREADED "Whether to build multi-threaded libraries" ON)
+
+# For now, we only actually support static/dynamic run-time variants for
+# Visual C++. Provide both options for Visual C++ users, but just fix
+# the values of the variables for all other platforms.
+if(MSVC)
+ option(BUILD_STATIC_RUNTIME "Whether to build libraries linking against the static runtime" ON)
+ option(BUILD_DYNAMIC_RUNTIME "Whether to build libraries linking against the dynamic runtime" ON)
+else(MSVC)
+ set(BUILD_STATIC_RUNTIME OFF)
+ set(BUILD_DYNAMIC_RUNTIME ON)
+endif(MSVC)
+
+# The default set of library variants that we will be building
+boost_add_default_variant(RELEASE DEBUG)
+boost_add_default_variant(STATIC SHARED)
+boost_add_default_variant(SINGLE_THREADED MULTI_THREADED)
+boost_add_default_variant(DYNAMIC_RUNTIME STATIC_RUNTIME)
+
+# Extra features used by some libraries
+set(BUILD_PYTHON_NODEBUG ON)
+boost_add_extra_variant(PYTHON_NODEBUG PYTHON_DEBUG)
+##########################################################################
+
+##########################################################################
+# Installation #
+##########################################################################
+if(BOOST_VERSION_SUBMINOR GREATER 0)
+ set(BOOST_HEADER_DIR
+ "include/boost-${BOOST_VERSION_MAJOR}_${BOOST_VERSION_MINOR}_${BOOST_VERSION_SUBMINOR}")
+else(BOOST_VERSION_SUBMINOR GREATER 0)
+ set(BOOST_HEADER_DIR
+ "include/boost-${BOOST_VERSION_MAJOR}_${BOOST_VERSION_MINOR}")
+endif(BOOST_VERSION_SUBMINOR GREATER 0)
+install(DIRECTORY boost
+ DESTINATION ${BOOST_HEADER_DIR}
+ PATTERN "CVS" EXCLUDE
+ PATTERN ".svn" EXCLUDE)
+#
+# TDS 20080526: Getting a segfault here even with the ifs. At r45780, with these lines
+# uncommented:
+# 1. cmake the workspace
+# 2. run ccmake and turn OFF BUILD_MULTI_THREADED and BUILD_SHARED
+# 3. 'c' to configure
+# 4. 'g' to generate.... segfault.
+# 5. run rebuild_cache at the command line: no segfault this time.
+#
+# With these lines commented out, step 4 above does not segfault.
+#
+#if (NOT TEST_INSTALLED_TREE)
+ # If I don't have if around this, I get a seg fault
+# install(EXPORT boost-targets DESTINATION "lib/Boost${BOOST_VERSION}")
+#endif (NOT TEST_INSTALLED_TREE)
+##########################################################################
+
+##########################################################################
+# Binary packages #
+##########################################################################
+set(CPACK_PACKAGE_NAME "Boost")
+set(CPACK_PACKAGE_VENDOR "Boost.org")
+set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Boost ${BOOST_VERSION}")
+set(CPACK_PACKAGE_DESCRIPTION_FILE "${Boost_SOURCE_DIR}/README.txt")
+set(CPACK_RESOURCE_FILE_README "${Boost_SOURCE_DIR}/README.txt")
+set(CPACK_RESOURCE_FILE_LICENSE "${Boost_SOURCE_DIR}/LICENSE_1_0.txt")
+set(CPACK_RESOURCE_FILE_WELCOME "${Boost_SOURCE_DIR}/Welcome.txt")
+set(CPACK_PACKAGE_VERSION "${BOOST_VERSION}")
+set(CPACK_PACKAGE_VERSION_MAJOR "${BOOST_VERSION_MAJOR}")
+set(CPACK_PACKAGE_VERSION_MINOR "${BOOST_VERSION_MINOR}")
+set(CPACK_PACKAGE_VERSION_PATCH "${BOOST_VERSION_SUBMINOR}")
+set(CPACK_PACKAGE_INSTALL_DIRECTORY "Boost")
+
+if(WIN32 AND NOT UNIX)
+ # There is a bug in NSI that does not handle full unix paths properly. Make
+ # sure there is at least one set of four (4) backlasshes.
+ # NOTE: No Boost icon yet
+# set(CPACK_PACKAGE_ICON "${Boost_SOURCE_DIR}/tools/build/CMake\\\\InstallIcon.bmp")
+# set(CPACK_NSIS_INSTALLED_ICON_NAME "bin\\\\MyExecutable.exe")
+ set(CPACK_NSIS_DISPLAY_NAME "Boost ${BOOST_VERSION_MAJOR}.${BOOST_VERSION_MINOR}.${BOOST_VERSION_SUBMINOR}")
+ set(CPACK_NSIS_HELP_LINK "http:\\\\\\\\www.boost.org")
+ set(CPACK_NSIS_URL_INFO_ABOUT "http:\\\\\\\\www.boost.org")
+ set(CPACK_NSIS_CONTACT "boost-users_at_[hidden]")
+ set(CPACK_NSIS_MODIFY_PATH ON)
+
+ # Encode the compiler name in the package
+ if (MSVC60)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-vc6")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Microsoft Visual C++ 6")
+ elseif (MSVC70)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-vc7")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Microsoft Visual Studio 2002")
+ elseif (MSVC71)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-vc71")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Microsoft Visual Studio 2003")
+ elseif (MSVC80)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-vc8")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Microsoft Visual Studio 2005")
+ elseif (MSVC90)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-vc9")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Microsoft Visual Studio 2008")
+ elseif (BORLAND)
+ set(CPACK_PACKAGE_FILE_NAME "Boost-${BOOST_VERSION}-borland")
+ set(CPACK_NSIS_DISPLAY_NAME "${CPACK_NSIS_DISPLAY_NAME} for Borland C++ Builder")
+ endif (MSVC60)
+ set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${CPACK_NSIS_DISPLAY_NAME}")
+endif(WIN32 AND NOT UNIX)
+include(CPack)
+
+if(COMMAND cpack_configure_downloads)
+ cpack_configure_downloads(
+ "http://www.osl.iu.edu/~dgregor/Boost-CMake/1.36.0/"
+ ALL ADD_REMOVE)
+endif()
+##########################################################################
+
+##########################################################################
+# Building Boost libraries #
+##########################################################################
+# Always include the directory where Boost's include files will be.
+if (TEST_INSTALLED_TREE)
+ # Use the headers from the installation directory
+ include_directories("${CMAKE_INSTALL_PREFIX}/${BOOST_HEADER_DIR}")
+else (TEST_INSTALLED_TREE)
+ # Use the headers directly from the Boost source tree (in boost/)
+ include_directories(${Boost_SOURCE_DIR})
+endif (TEST_INSTALLED_TREE)
+
+# Boost.Build version 2 does this due to trouble with autolinking
+# during building and testing.
+# TODO: See if we can actually use auto-linking in our regression tests.
+add_definitions(-DBOOST_ALL_NO_LIB=1)
+
+# Add build rules for documentation
+add_subdirectory(doc)
+
+# Add build rules for all of the Boost libraries
+add_subdirectory(${BOOST_LIBS_DIR})
+
+# Add build rules for all of the Boost tools
+# TODO: On hold while I work on the modularity code
+# add_subdirectory(tools)
+##########################################################################
+