Subject: Re: [boost] [config] Error in Jamfile influencing other libraries
From: Adam Wulkiewicz (adam.wulkiewicz_at_[hidden])
Date: 2014-06-09 15:15:13
John Maddock wrote:
>> John,
>>
>> Have you confirmed that it is actually this commit that is causing the
>> failure?
>>
>> Like you, " I don't understand why it would impact on other libraries at
>> all?"
>
> No, and I'm unable to run the tests in /status/ either with or without
> the new config test present, I get some typically inscrutable
> Boost.Build errors:
>
> M:/data/boost/boost/tools/build/src/build\property.jam:740: in
> class_at_property-map.find from module object(property-map)@255
> error: Ambiguous key
> M:/data/boost/boost/tools/build/src/build\type.jam:333: in
> generated-target-ps from module type
> M:/data/boost/boost/tools/build/src/build\type.jam:270: in
> type.generated-target
> -suffix from module type
> M:/data/boost/boost/tools/build/src/build\virtual-target.jam:505: in
> virtual-target.add-prefix-and-suffix from module virtual-target
> M:/data/boost/boost/tools/build/src/build\virtual-target.jam:464: in
> _adjust-name from module object(file-target)@98264
> M:/data/boost/boost/tools/build/src/build\virtual-target.jam:253: in
> abstract-file-target.__init__ from module object(file-target)@98264
> M:/data/boost/boost/tools/build/src/build\virtual-target.jam:557: in
> class_at_file-target.__init__ from module object(file-target)@98264
> M:/data/boost/boost/tools/build/src/kernel\class.jam:90: in class.new
> from module class
>
> How do I checkout the same tree as is used for testing?
>
During testing bjam is built and run like this:
# Starting tests
("D:\lib\test-boost3\tools_bb\src\engine\bin.ntx86\bjam.exe"
"-sBOOST_BUILD_PATH=D:\lib\test-boost3;D:\lib\test-boost3\tools_bb\src"
"-sBOOST_ROOT=D:\lib\test-boost3\boost_root" "--bo
ost=D:\lib\test-boost3\boost_root"
"--boost-build=D:\lib\test-boost3\tools_bb\src" "--debug-configuration"
-l300 toolset=msvc-10.0 -d2 preserve-test-targets=off --dump-tests -m64
"--build-dir=D:\lib
\test-boost3\results" >>"D:\lib\test-boost3\results\bjam.log" 2>&1)...
AFAIU if you just run (from BOOST_ROOT/status):
b2 --dump-tests
you should get similar results. So e.g. after running:
b2 --dump-test | grep 'geometry'
you should get the list of all of the tests which will be run for
Geometry. Currently only 2.
Regards,
Adam